RO + Linux (cedega) - как?

[Shoki]

Некоторое время назад мне приходилось переводить часы на год назад чтобы избавиться от ситуации как у тебя сейчас. Потом всё стало нормально.

Ты попробуй переведи на год, на два назад. "Папытка нэ пытка! Правда таварыщ Бэрия?"

[mak]

@Antzekyrre:
Время - корректнее некуда. Поясняю - под виндой у меня RO работает, мне его нужно на той же машине пустить под cedega.

На всякий случай уточняю - интересует, как запустить именно мотровский клиент, а то мне тут уже советовали...
получилось? если получилось, то как?
попробовал сегодня вечером, получилось точно как ты описал. завтра буду шаманить...

[Antzekyrre]

Нет, не получилось... нужно разбираться в том, как именно работает связка ruro.exe + sakexe.exe, и что именно из используемого этой связкой цедега не держит. А разбираться мне пока лениво.

[TERSERCUTOR]

Поднимал такую тему месячишко с назад....

Ноль(!) Ампер.... 

Самое смешное, у меня под седегой - далее клипки Start Game вообще не доходит

Запускал просто под Вайном - вхожу->логин->выбор Перца, а вот при загрузке карты - валится нафиг

Сделаем UP теме - знаю, что кто то пользовал ентот вопрос, о-очень просим поделиться опытом?!

[Antzekyrre]

Ооо, так под вайном она работает? Лед тронулся, господа присяжные заседатели. Поделись своим конфигом вайна (ПМ-кой)? Будем думать, как его в цедегу переносить...

[TERSERCUTOR]

WINE REGISTRY Version 2
;; All keys relative to \Machine\Software\Wine\Wine\Config

;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
[Drive A]
"Type" = "floppy"
"Path" = "/media/floppy"
"Label" = "/media/floppy"
"Device" = "/dev/fd0"

[Drive C]
"Path" = "%HOME%/.wine/fake_windows"
"Type" = "hd"
"Label" = "fake_windows"
"Filesystem" = "win95"

[Drive M]
"Type" = "cdrom"
"Path" = "/media/cdrom"
"Label" = "/media/cdrom"
"FS" = "win95"
"Device" = "/dev/sr0"

[Drive X]
"Type" = "hd"
"Path" = "/tmp"
"Label" = "Tmp Drive"
"FS" = "win95"

[Drive Y]
"Type" = "network"
"Path" = "%HOME%"
"Label" = "Home"
"FS" = "win95"

[Drive Z]
"Type" = "network"
"Path" = "/"
"Label" = "Root"
"FS" = "win95"

[wine]
"Windows" = "C:\Windows"
"System" = "C:\Windows\System"
"Temp" = "C:\Windows\Temp"
"Path" = "C:\Windows;C:\Windows\System;X:\;Y:\"
"Profile" = "c:\windows\Profiles\Administrator"
"GraphicsDriver" = "x11drv"
;"ShowDirSymlinks" = "1"
;"ShowDotFiles" = "1"
"ShellLinker" = "wineshelllink"

<wineconf>

[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)
;"Windows" = "winxp"
; DOS version to imitate
;"DOS" = "6.22"

; Be careful here, wrong DllOverrides settings have the potential
; to pretty much kill your setup.
[DllOverrides]
; some dlls you may want to change
"oleaut32" = "builtin, native"
"ole32" = "builtin, native"
"comdlg32" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"shdocvw" = "builtin, native"
"advapi32" = "builtin, native"
"msvcrt" = "native, builtin"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
"msi" = "native, builtin"
"msvcp60.dll" = "native, builtin"
; you can specify applications too
; this one will apply for all notepad.exe
;"notepad.exe" = "native, builtin"
; this one will apply only for a particular file
;"C:\windows\regedit.exe" = "native, builtin"
; default for all other dlls
"" = "builtin, native"

[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "640x480"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Use XRandR extension if present
"UseXRandR" = "Y"
; Use the take focus protocol
"UseTakeFocus" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "N"
; Run in synchronous mode (useful for debugging X11 problems)
;;"Synchronous" = "Y"
;
; Use the Render extension to render client side fonts (default "Y")
;;"ClientSideWithRender" = "Y"
; Fallback on X core requests to render client side fonts (default "Y")
;;"ClientSideWithCore" = "Y"
; Set both of the previous two to "N" in order to force X11 server side fonts
;
; Anti-alias fonts if using the Render extension (default "Y")
;;"ClientSideAntiAliasWithRender" = "Y"
; Anti-alias fonts if using core requests fallback (default "Y")
;;"ClientSideAntiAliasWithCore" = "Y"
;

[fonts]
;Read the Fonts topic in the Wine User Guide before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-adobe-helvetica-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-adobe-times-"
"DefaultSansSerif" = "-adobe-helvetica-"

;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-----------koi8-r"
;"DefaultFixed" = "-monotype-courier new-----------koi8-r"
;"DefaultSerif" = "-monotype-times new roman-----------koi8-r"
;"DefaultSansSerif" = "-monotype-arial-----------koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"

; the TrueType font dirs you want to make accessible to wine
[FontDirs]
"dir1" = "/usr/X11R6/lib/X11/fonts/truetype"
"dir2" = "/usr/X11R6/lib/X11/fonts/TrueType"
"dir3" = "/usr/X11R6/lib/X11/fonts/TT"

[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"

[parallelports]
"Lpt1" = "/dev/lp0"

[ppdev]
;; key: io-base of the emulated port
;; value : parport-device{,timeout}
;; timeout for auto closing an open device ( not yet implemented)
;"378" = "/dev/parport0"
;"278" = "/dev/parport1"
;"3bc" = "/dev/parport2"

[spooler]
"FILE:" = "tmp.ps"
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"

[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
;"write" = "0x779,0x379,0x280-0x2a0"

[Debug]
;"RelayExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"RelayInclude" = "user32.CreateWindowA"
;"RelayFromExclude" = "user32;x11drv"
;"RelayFromInclude" = "sol.exe"
;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"SpyExclude" = "WM_SIZE;WM_TIMER;"

[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Where to find the global registries
;"GlobalRegistryDir" = "/etc";
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"

[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
;; this has nothing to do with the windows version Wine returns:
;; set the "Windows" value in the [Version] section if you want that.
"WineLook" = "Winxp"

[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"
"UsePrimary" = "0"

; List of all directories directly contain .AFM files
[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/enscript/afm"
"3" = "/usr/X11R6/lib/X11/fonts/Type1"
"4" = "/usr/lib/wine/afm"

[WinMM]
; Uncomment the "Drivers" line matching your sound setting.

"Drivers" = "wineoss.drv" ; default for most common configurations
;"Drivers" = "winearts.drv" ; for KDE
;"Drivers" = "winealsa.drv" ; for ALSA users
;"Drivers" = "winejack.drv" ; for Jack sound server
;"Drivers" = "winenas.drv" ; for NAS sound system
;"Drivers" = "wineaudioio.drv" ; for Solaris machines
;"Drivers" = "" ; to disable sound
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"

[dsound]
;; HEL only: Number of waveOut fragments ahead to mix in new buffers.
;"HELmargin" = "5"
;; HEL only: Number of waveOut fragments ahead to queue to driver.
;"HELqueue" = "5"
;; Max number of fragments to prebuffer
;"SndQueueMax" = "28"
;; Min number of fragments to prebuffer
;"SndQueueMin" = "12"
;; Forces emulation mode (using wave api)
;"HardwareAcceleration" = "Emulation"
;; Sets default playback device (0 - number of devices - 1)
;"DefaultPlayback" = "0" ; use first device (/dev/dsp)
;"DefaultPlayback" = "1" ; use second device (/dev/dsp1)
;"DefaultPlayback" = "2" ; use third device (/dev/dsp2)
;; Sets default capture device (0 - number of devices - 1)
;"DefaultCapture" = "0" ; use first device (/dev/dsp)
;"DefaultCapture" = "1" ; use second device (/dev/dsp1)
;"DefaultCapture" = "2" ; use third device (/dev/dsp2)

[Network]
;; Use the DNS (Unix) host name always as NetBIOS "ComputerName" (boolean, default "Y").
;; Set to N if you need a persistent NetBIOS ComputerName that possibly differs
;; from the Unix host name. You'll need to set ComputerName in
;; HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\ComputerName\ComputerName, too.
;"UseDnsComputerName" = "N"

[ppd]
"generic" = "/usr/lib/wine/ppd/generic.ppd"
;; sample AppDefaults entries

; 3 InstallShield versions who like to put their full screen window in front,
; without any chance to switch to another X11 application.
; So just catch them in a desktop window.

[AppDefaults\_INS0432._MP\x11drv]
"Desktop" = "640x480"

[AppDefaults\_INS0466._MP\x11drv]
"Desktop" = "640x480"

[AppDefaults\_INS0576._MP\x11drv]
"Desktop" = "640x480"

[AppDefaults\_INS5176._MP\x11drv]
"Desktop" = "640x480"

[AppDefaults\_INS5576._MP\x11drv]
"Desktop" = "640x480"

;[AppDefaults\iexplore.exe\DllOverrides]
;"shlwapi" = "native"
;"rpcrt4" = "native"
;"ole32" = "native"
;"shdocvw" = "native"
;"wininet" = "native"
;"shfolder" = "native"
;"shell32" = "native"
;"shell" = "native"
;"comctl32" = "native"
;
;[AppDefaults\setup.exe\x11drv]
;"Desktop" = "800x600"
;
;[AppDefaults\sol.exe\Version]
;"Windows" = "nt40"
;
;; Some games (Quake 2, UT) refuse to accept emulated dsound devices.
;; You can add an AppDefault entry like this for such cases.
;[AppDefaults\pickygame.exe\dsound]
;"EmulDriver" = "N"

[/wineconf]

[TERSERCUTOR]

Да, "прицепом":

Енту строку:
"msvcp60.dll" = "native, builtin"
Те добовлять придётся точно ручками

Без ентой длл`ки многие Игры - и вСедеге и Вайне - принципиально колом встают

Она в вЫнь\system32 "валяется", т.е. копируешь добавляешь в конфиг и прю

Морка только так и завелась, правда под Седегой 0{;-)

[Astar]

Одно время без проблем запускал RO с Wine ( не WineX ), но после апдейта где-то месячной давности загружаться перестал. Хотя могу попробовать запустить последний билд с последним wine-ом.

[mak]

@Antzekyrre:
Ооо, так под вайном она работает? Лед тронулся, господа присяжные заседатели. Поделись своим конфигом вайна (ПМ-кой)? Будем думать, как его в цедегу переносить...
она совершенно точно работает и под цедегой.
<!-- m --><a class="postlink" href="http://transgaming.org/forum/viewtopic.php?t=907&highlight=ragnarok&sid=2079f301110be7c83d81db93d8ebeb0b">http://transgaming.org/forum/viewtopic. ... 93d8ebeb0b</a><!-- m -->

но как бы вот понять, чем наша версия отличается от тех, что используют буржуины...

[Antzekyrre]

@mak:
но как бы вот понять, чем наша версия отличается от тех, что используют буржуины...
Чем-чем... файлом ruro.exe.

[TERSERCUTOR]

Осталось бросить "вопль народа" к Спаку о разговении клиента

[mak]

@Antzekyrre:

@mak:
но как бы вот понять, чем наша версия отличается от тех, что используют буржуины...
Чем-чем... файлом ruro.exe.
ну так и клиент как-то переделан. sakray тоже запускает ruro.
кстати, твои опасения про апдейт оправдались - я попробовал вчера обновиться из под cedega, не вышло. по http ruro забирает файлы, а по ftp - обламывается. похоже, что он дюже криво в этом месте написан.
а запустить пока так и не удается.